12V Solar Panel Kit Complete Controller for RV/Boat Battery Charger
12V Solar Panel Kit Complete Controller for RV/Boat Battery Charger
SPECIFICATIONS
Brand Name: BOGUANG
Number of Panels: 1
Flexible Solar Panel: Yes
Foldable Solar Panel: No
Type: Solar Panel
Module Efficien: 21.8%
Model Number: Solar Panel Kit
Size: 1060*530*2.5mm
Material: Monocrystalline Silicon
Nominal Capacity: 100 watt , 200 watt
Number of Cells: 36 cells
Max. Power: 100w ,200w
is_customized: Yes
Certification: CE
Certification: FCC
Certification: RoHS
Certification: weee
100w solar panel kit Voltage output: 12v / 5V
200w solar panel kit Voltage output: 12V / 24V / 5v
100w solar panel Voltage output: 19.8V
200w solar panel Voltage output: 19.8V / 39.6V
Solar Controller: Connect lithium battery, lead-acid battery
Flexible Solar Panel with: 0.5M extension solar cable
solar panel power: 3m SOLAR Battery Cable ; red and black
PV Cable: 3M extension solar cable
Boguang 19.8V 100W Flexible Solar Panel 100 W 200 Watt Solar Panels kit complete Controller for RV Boat Car Home 12V 24V Battery Charger
Shipping Information
Dear Buyer:
Thank you for ordering from our store.
For Some Remote Area of Spain or France, there is no freight service, pls check the zip code as following:
For Spain: 35xxx 38xxx 07xxx 51xxx 52xxx.
For France: 987xx 986xx 984xx 971xx 988xx 975xx 976xx 973xx 974xx 972xx.
Please contact with us for confirm your zip code.
For Spain Island and France Island, there may be extra remote freight cost, so if there were remote cost, then we will contact with buyer.
For USA Client: there are remote area as well, so if your area belongs to remote area, we will contact with you as well.
Features:
[Multiple Compatibility] Perfect solar power kit for a variety of off-grid applications like shed, cabin, gate opener, etc where 12V battery is used, as well as to charge and maintain AGM, Flooded, GEL, Deep Cycle and Seal Lead Acid, etc batteries in the car, Rv, boat, marine, trailer, camper, pump, etc.
[Light weight] Made of high efficient solar cells,withstand extreme weather conditions like UV, anti-rusting, IP65 waterproof.
[Intelligent Charging] Optimized 3-stages charging algorithm allows to charge the battery more efficiently, and prevent the battery from overcharge, over-discharge, over-voltage, short circuit, etc, fully protect battery and extend the lifetime.
[Visual Monitor] Visual bright LED indicators help to monitor battery conditions and better understand the status of solar panel and load. Exclusively equipped three working modes for load, allowing to set up the load to work under dusk to dawn automatically plus working hours according to personal requirement, very practical and useful.
Maximum power(Pmax) 100W
Maximum system voltage 700V DC
Open circuit voltage(Voc) 23.76V
Short circuit current(Isc) 5.55A
Maximum power voltage(Vmp) 19.8V
Maximum power current(Imp) 5.05A
Weight 2.1KG
Size 1060*530*2.5mm
Operating temperature(NOCT) 45 plus or minus 2 Celsius system
STC: lrradiance1000w/m2,Temperature 25 Celsius system, AM=1.5
Please note: If you test the solar panel, the solar panel must be tested under the sun. The solar panel is exposed to sunlight at different times and the temperature is different, which will affect the output power of the solar panel.
100W kit (1pcs 100w solar panel kits)
Packing listing:
1. 1 pcs 100w solar panel
2. 10A 12v/24v charge controller
3. 1 set Extension cable with PV connector
4. 1 set cable with alligator clip (connect to battery)
200W kit
Packing listing:
1. 2pcs 100w solar panel
2. 20A 12v/24v charge controller
3. 1 set Extension cable with PV connector
4. 1 set cable with alligator clip (connect to battery)
5. 1 set 2 in 1 PV connector (in parallel solar panel
Safety Instructions:
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL ,lithium ions (It is not suited for nickel metal hydride, or other batteries).
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
System Connection:
1.Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
Controller connection instructions
a Before connecting the solar panel, please connect the controller to the battery first. Connecting the solar panel without connecting the battery may cause the controller to burn out and fail to display.
b After the controller is connected to the storage battery, connect the above-mentioned series or parallel solar panels to the controller through the transfer cable.
c Finally, connect the required DC load to the load end of the controller. If the load does not work, press the third button of the controller.
d According to the controller manual, adjust the parameters you need.
1set 3M Extension cable
1set 3M cable with alligator clip(Connect the battery)
100W solar panel (1pcs 100w solar panel )
Packing listing:
1. 1pcs 100w solar panel
200W solar panel (2pcs 100w solar panel )
Packing listing:
1. 2pcs 100w solar panel
Notes for use:
a. This product must not come into contact with highly corrosive substances.
b. It is strictly forbidden to modify, disassemble, drop, and hit the junction box and products by yourself, avoid stepping on the surface and scratching the surface with hard objects during use.
c. A large number of scratches or dirt on the surface of the solar panel may cause the solar cell module to be inefficient, and in severe cases may cause burnout.
d. The suitable ambient temperature range of this product: -20 ° C-80 ° C, please do not exceed this range.
e. The solar panel must be installed in an area with good sunlight and no shadow. The long-term work of the solar cell module in the sun with shadow may have the risk of burning.
f. It is forbidden to connect the positive and negative poles of the product together, and it is forbidden to put the product into water or fire, otherwise it will damage the product.
g. The overall power of the photovoltaic module must be less than the rated power of the controller (rated voltage × rated current). It is strictly prohibited to overload the controller.
h. The total voltage of the photovoltaic module connected to the controller must be within the photovoltaic input voltage range of the controller.
i. The inverter can only be connected to the battery, not directly to the controller.